Business

Tax Reform Bills: The Verdict of Nigerians

Published

2 years ago

March 6, 2025

Ismaila Ahmad Abdullahi Ph.D

The public hearings conducted recently by the two Chambers of the National Assembly have elicited positive responses from a broad spectrum of Nigerians, cutting across regional interest groups, government agencies, civil society groups, concerned individuals, the academia, and Labour Unions, among diverse others. Contrary to a few dissensions hitherto expressed in the media, almost all the stakeholders who spoke during the week-long sessions were unanimous in their declaration that the hallowed Chambers should pass the tax reform bills after a clean-up of the grey areas.

The public hearings were auspicious for all Nigerians desirous of economic growth and fiscal responsibility. They were also a watershed moment for the Federal Inland Revenue Service, which had been upbeat about the tax reforms. Indeed, the public hearings had rekindled hope in the tenets of democracy that guarantee freedom of expression and equitable space for cross-fertilisation of ideas. Without gainsaying the fact, the tax reform bills have been unarguably about the most thought-provoking issues in Nigeria today, drawing variegated perspectives and commentaries from even unlikely quarters such as the faith-based leaders, student bodies, and trade unions, which speaks much about the importance of the bills.

In the build-up to the public hearings, not many people believed that the bills would make it to the second reading, much less the public hearings. Even the Northern stakeholders who seemed unlikely to support the passage of the bills have softened their stance and have given valuable suggestions that would enrich the substance of the bills. The Arewa Consultative Forum came to the public hearings well-prepared with a printed booklet that addressed their concerns. It concluded with an advisory that the bills should be “Well planned, properly communicated, strategically implemented and ample dialogue and political consensus allowed for the reforms to be accepted.”

The concerns of ACF ranged from the composition of the proposed Nigeria Revenue Service Board as contained in Part 111, Section 7 of the bill, the unlimited Presidential power to exempt/wave tax payment as proposed in Section 75(1) of the bill, the family income or inheritance tax as contained in Part 1, Section 4(3) of the bill, to the issues around development levy and VAT. On the development levy, the ACF stated that unless the Federal Government is considering budgetary funding for TETFUND, NASENI and NITDA, it does not see the “wisdom behind the plan to replace (them) with NELFUND”.

The position of the North was equally reinforced by the Supreme Council for Shariah in Nigeria, Northern Elders Forum, Kano State Government, Professor Auwalu Yadudu, and the FCT Imams. Like the ACF, these stakeholders lent their respective voices to the Section on the Inheritance Tax in Part 1 of the bill and the use of the term ‘ecclesiastical’, which, in their views, undermines certain religious rights and beliefs. The Kano State Government, represented by Mahmud Sagagi, affirmed that “we support tax modernisation” but cautioned that “we must ensure that this process does not come at the expense of states’ constitutional rights and economic stability”. Professor Auwalu Yadudu, a constitutional law professor, drew attention to the use of the ‘supremacy clause’ and cautioned that the repeated use of “notwithstanding” in the bills would undermine the supremacy of the Nigerian constitution if passed as such.

Other stakeholders that made contributions at the sessions included the Nigeria Liquefied Natural Gas, Fiscal Responsibility Commission, Revenue Mobilisation Allocation and Fiscal Commission, Federal Ministry of Industry, Trade and Investment, Institute of Chartered Accountants of Nigeria, Chartered Institute of Taxation of Nigeria, Nigeria Customs Service, and a host of others. While most of their concerns bordered on technical issues requiring fine-tuning, they were unanimous in their support for the bills. They aligned with the position of the Executive Chairman of the Federal Inland Revenue Service, Zacch Adedeji, Ph.D. and the Chairman of the Presidential Committee on Fiscal Policy and Tax Reforms, Mr Taiwo Oyedele, which is that the extant tax laws and fiscal regulations are obsolete necessitating reforms aimed at creating a fair and equitable tax and fiscal space to grow Nigeria’s economy.

In one of the sessions, Dr Zaach Adedeji expounded on the criss-cross of trade activities in the Free Trade Zone whereby companies misuse tax waivers as exporters to sell their goods or services in the Customs Area at an amount usually less than the price the operators in the Customs Area who pay VAT and other taxes sell theirs thereby disrupting business transactions. This way, the operators in the Free Trade Zone shortchange the government in paying their due taxes by circumventing extant regulations, which are inimical to the economy’s growth.

Overall, the presentations were forthright, foresighted, and helpful in elucidating the issues contained in the bills. According to the statistics read out at the end of the hearings at the Senate, 75 stakeholders were invited, 65 made submissions, and 61 made presentations. At the House of Representatives 53 stakeholders made presentations. By all means, this is a fair representation. Given the presentations, it is evident that the National Assembly has gathered enough materials to guide its deliberations on the bills. As we look forward to the passage of the bills, we commend the leadership of the National Assembly for their unwavering commitment to making the bills see the light of the day.

Abdullahi is the Director of the Communications and Liaison Department, FIRS.

Share on Facebook

Business

Turning Africa’s Raw Materials Into Wealth: The ARMS 2026 Industrial Agenda

Published

3 days ago

September 29, 2026

The Gleamer

By Joel Ajayi

For decades, Africa’s vast natural resources have powered industries and economies far beyond the continent, while many African countries have remained largely exporters of unprocessed commodities and importers of finished products.

That familiar pattern is now coming under renewed scrutiny as policymakers, researchers, investors and industrialists seek to change the direction of Africa’s resource economy.

At the centre of that conversation is the second edition of the Africa Raw Materials Summit (ARMS 2026), scheduled for October 19 and 20 at the Abuja Continental Hotel, Abuja, under the theme: “From African Feedstock to African Factories.”

Organised by the Raw Materials Research and Development Council (RMRDC), the summit is being positioned as more than another gathering of policymakers and industry stakeholders. It is intended to provide a platform for confronting the structural challenges that have kept African raw materials largely disconnected from local manufacturing.

Africa has for years operated largely within a “pit-to-port” economic model, exporting raw materials while importing expensive finished products.

Speaking at a press conference ahead of the summit on Tuesday in Abuja, the Director-General and Chief Executive Officer of RMRDC, Prof. Nnanyelugo Martin Ike-Muonso, said the event would bring together policymakers, investors, researchers, technology providers and industrialists to develop practical strategies for transforming Africa’s abundant natural resources into industrial wealth.

The challenge, therefore, is not simply the abundance of resources, but the continent’s ability to transform those resources into industrial value, employment, technology and wealth within Africa.

Nigeria alone, according to the RMRDC, has more than $582.4 billion in documented non-renewable natural resources, while the wider continent possesses substantial deposits of critical minerals, agricultural raw materials and industrial feedstock.

Yet, the benefits of this resource endowment have often been constrained by inadequate processing capacity, weak infrastructure, limited technology, financing gaps and fragmented regional value chains.

From Dialogue to Industrial Action

ARMS 2026 builds on the maiden edition held in May 2025, which attracted more than 1,000 delegates from across the world.

The inaugural summit also witnessed the unveiling of the Ten-Year Raw Materials Transformation Roadmap (2025–2034) by the Minister of State for Industry, Senator John Owen Enoh.

The roadmap was designed around areas including technological capability, climate-resilient processing and backward integration, establishing a policy framework for greater domestic utilisation of Africa’s raw materials.

The second edition is expected to move the conversation further by bringing policy, capital, technology and industrial stakeholders around practical mechanisms for turning raw materials into locally manufactured products.

One of the major proposals highlighted by the RMRDC is the 30 per cent Mandatory Value Addition Bill, which seeks to establish a statutory minimum level of value addition to Nigerian raw materials before export.

The Council says the proposed framework could support job creation, import substitution, foreign-exchange conservation and increased manufacturing contribution to the economy.

Building the Infrastructure for Value Addition

The industrial transformation envisaged by ARMS 2026 goes beyond legislation.

A major concern is the “missing middle” between where raw materials are produced and where factories are located.

Poor transportation networks, inadequate cold-chain facilities, weak rural roads, limited testing and certification infrastructure and border-related delays can make locally sourced materials more expensive and less competitive.

Consequently, logistics and infrastructure constitute one of the five principal pillars of the summit.

The objective is to develop more reliable corridors connecting farms and mines with processing centres and manufacturing facilities, thereby reducing losses and improving the movement of industrial inputs.

The Digital Dimension

Technology is also becoming an important part of the Council’s strategy.

The RMRDC says it has developed the Nigeria Integrated Information Statistical System for Raw Materials and Products (NISSRAMP), described as a digital repository containing information on feedstock deposits, specifications, production outputs and industrial absorption rates.

The Council has also highlighted its transition towards paperless operations and its certification as a Data Controller/Processor of Major Importance by the Nigeria Data Protection Commission.

Such digital infrastructure could provide investors and manufacturers with better information about the availability and characteristics of raw materials while supporting more informed industrial planning.

Turning Waste Into Industrial Inputs

Another major component of ARMS 2026 is the proposed expansion of the circular economy.

The summit will examine how agricultural by-products, mine tailings, scrap metals and biomass can be recovered and reused as inputs for new production processes rather than being treated simply as waste.

The RMRDC argues that such an approach could lower raw-material costs while supporting more sustainable and climate-resilient manufacturing systems.

For Africa, where industrial expansion must increasingly balance economic development with environmental considerations, waste industrialisation could become an important part of the continent’s manufacturing conversation.

From National Production to African Value Chains

The African Continental Free Trade Area is another important element of the summit’s agenda.

The RMRDC sees AfCFTA as an opportunity to create regional value chains in which raw materials sourced in one African country can be processed and supplied to manufacturers in another.

Under such a model, Africa would move beyond simply exporting commodities to external markets and develop stronger internal networks for supplying chemicals, refined minerals, agricultural inputs and other industrial materials across national borders.

This approach places regional integration at the heart of Africa’s industrialisation strategy.

Bridging Research and Capital

A recurring weakness in many developing economies is the gap between research and commercialisation.

Innovations may emerge from universities, research institutions and laboratories without receiving the financing, equipment or market connections required to become commercially viable.

ARMS 2026 intends to address that gap through technology commercialisation and capital linkages, connecting research outputs with investors, development finance institutions and industrial off-takers.

The RMRDC has also cited partnerships with the Bank of Industry for commercial-scale post-harvest processing and a South-South technology-transfer partnership with the National Innovation Centre par Excellence in Shanghai, China.

A Larger Industrial Conversation

The scale of ARMS 2026 is expected to be significantly larger than the maiden edition.

The organisers project more than 1,800 delegates from all 54 African countries and global industrial partners.

The programme will feature high-level policy dialogues, technical panels, an advanced raw materials and technology exhibition, industrial site visits and the African Raw Materials Industry Awards.

The exhibition, in particular, is expected to showcase locally fabricated processing machinery, advanced domestic materials, green chemicals and engineered commercial inputs.

Beyond the speeches and exhibitions, however, the real significance of ARMS 2026 will ultimately depend on what happens after the summit.

Africa’s challenge has never been a shortage of raw materials. The more difficult question has been how to transform those resources into factories, products, skilled employment, technology and sustainable economic opportunities.

For Nigeria and the rest of the continent, the proposed shift from “pit-to-port” to “feedstock-to-factory” therefore represents a broader debate about the future structure of African economies.

ARMS 2026 seeks to place that debate firmly on the industrial agenda — with value addition, technology, finance, infrastructure, circular production and regional trade at the centre.

If the commitments and partnerships generated by the summit translate into measurable industrial activity, the event could provide another platform for Africa to examine how its enormous resource base can support stronger domestic manufacturing.

The message from the organisers is clear: the continent’s raw materials should not only leave African soil as commodities; they should increasingly become the foundation for African industrial production

Share on Facebook